MBB
DMASS liquid-filled shock-resistant pressure gauge possesses stainless steel watchcase, brass movement and IP65 protection level. It can be filled with different shock-resistant liquid based on customers’ requirements in different application scenario. The damping bolt with different standards can greatly improve the shock resistance performance of the pressure gauge. The competitive price makes it possible for assorting use of OEM.
Range ability: from 0…1bar to 0.1000bar
The stainless steel and high-performance pressure meter of DMASS is equipped standardly with 316L stainless steel movement and 304 stainless steel shell, possessing IP65 protection level and selecting the perfusion to be anti-shock. It satisfies the special requirements of chemical industry and oil industry.
Range ability: from 0…16mbar to 0…7000bar (negative pressure meter/vacuum meter)
Application fields: chemical industry and oil industry
The electric contact pressure meter of DMASS can realize the automatic control of open and close of equipment in system by changing the pressure in system. Inductance type electric contact can meet the requirement of anti-explosion which can be applied in dangerous conditions.
The stainless steel and high-performance pressure meter of DMASS is equipped standardly with 316L stainless steel movement and 304 stainless steel shell, possessing IP65 protection level and selecting the perfusion to be anti-shock. It sati...
EDC-S
EDC-S-type pressure sensor high cost, especially for supporting the use of massive quantities. It has Corrosion-resistant stainless steel design, high voltage and high alternating loads, long-term stability and other characteristics suitable for Static and dynamic measurements.
Range: 0 ... 0.bar to 0 ... 1000bar
Applications: Plastic Machinery
Construction Machinery
...
EDC-K
EDC-K-type pressure sensor high cost, especially for supporting the use of massive quantities. It has Corrosion-resistant stainless steel design, high voltage and high alternating loads, long-term stability and other characteristics suitable for Static and dynamic measurements.
Range: 0 ... 0.bar to 0 ... 1000bar
Applications: Plastic Machinery
Construction Machinery
...
EDS
General type pressure sensor of DMASS can be applied to measurement of nearly all industries. Based on the accuracy, range, output signal and the connection type of electric and machinery required by the customers, there are many types to choose and meet the actual requirements. It possesses design of corrosion resistance and stainless steel, super load protection and vibration resistance and easy installation
Range ability: from 0…1bar to 0…2500bar
Applic...
DSD-95
Description
The DMASS DSD95 series drive was designed as compact size meeting the demands of modem manufacruring environments requirements_smaller and more flexible machninery.The compact design to help machine designers and system intergrators meet these challenges.DSD95 can reach your applications requiring high peak torque,dynamic respons,easy using and flexible integration features.
The DMASS DSD95 series drive technology mee...
DSM-95
DMASS servo motor with high power denisty from 7.5KW up to 50KW
General Information
The DMASS DSM95 series motors was designed asan advanced and homogenous range of high performance servo actuators. The motors are permanetmagnet three-phase synchronous motors for the apllications with high demands to dynamics and positioning accuracy at small constructio...
DSD-93
DMASS Digital AC Servo Drive Systems of DMASERVO DSD9 3 with Safety System with Safety System and options for Communication Interface:
Analog
Interface( RS232/RS485 )
CANopen
EterCAT/Ethernet
Profibus-DP
Direct Mains Connection to 1x230 VAC or 3×400/480 V Motors with High Power Density up to 80 Nm / 16 Kw DMASS driv...
DSM-93
DMASS Digital AC Servo Drive Systems of DMASERVO DSD9 3 with Safety System with Safety System and options for Communication Interface:
Analog
Interface( RS232/RS485 )
CANopen
EterCAT/Ethernet
Profibus-DP
Direct Mains Connection to 1x230 VAC or 3×400/480 V Motors with High Power Density up to 80 Nm / 16 Kw DMASS driv...
DHPU-10
DMASS servo-hydraulic stations are independent hydraulic power unit, which provides oil pressure to the system as required by the actuator, and control fluid direction, pressure and flow for the host and the pump station separable kinds of hydraulic machinery , the user simply and hydraulic actuators (cylinder or hydraulic motor) with tubing connection on the host, hydraulic machinery can achieve the appropriate technology movement .DMASS servo hydraulic station can provide flow and pressure on demand based on changes in process operation , especially for cyclical changes in the production process applications.
Applications
Logistics ...
SETTIMA-Continuum high pressur
SETTIMA-Continuum high pressure screw pumps and power system uses a revolutionary design principles have low noise Continuum pump rotor shape, pitch and internal force balanced international patent Continuum pump has other competitors do not have advantages: greatly reduced noise, the average is lower than the standard gear pump 15db (A), reduce noise machine noise and operating environment, no noise reduction measures, cost savings, installation and gear pump compatible, it is easy to replace, and facilitates compliance with regulations on noise limits claim.
Applications:
PressElectric power
Seagoing Ships
SETTIMA-SMT three-screw series
SMT three screw series for low noise, low pressure fluid system, which uses axial flow design, with only three moving parts. The rotor is the only driving force transmission member extending pump housing. Screw rotary pump driven process produced with the pump cavity to form a perfect combination of sealing systems to SMT three screw pump with a high efficiency. and occurs only very smooth rolling action between the active screw and driven screw, thereby greatly reducing the pump system work noise and vibration. significantly reduce operating noise, improve operational efficiency of our products have been widely used and recognized the underlying causes.